AI/Stamping Question
AI/Stamping Question
As you NC gals know, I am a novice with AI and my project is busting my behind! I need some advice. I'm leaving home shortly to go to Jenny Craig, which shares a parking lot with Michael's. So I'm hoping for some good advice before I head out.
I know y'all have the answers!
I'm trying to do my metal Palm Pilot case. It's just plain boring. But it is not a flat surface. Every time I stamp over the AI, the impression doesn't come out right, so I end up cleaning it all off and starting totally over. I could scream!
Is it possible to seal the AI layer with the DecoArt DuraClear Varnish and then stamp over that? Could I remove the image with Staz-On cleaner or something like that without damaging the varnish? If so, what ink would you use and what cleaner? Or other ideas?
TIA
I know y'all have the answers!
I'm trying to do my metal Palm Pilot case. It's just plain boring. But it is not a flat surface. Every time I stamp over the AI, the impression doesn't come out right, so I end up cleaning it all off and starting totally over. I could scream!
Is it possible to seal the AI layer with the DecoArt DuraClear Varnish and then stamp over that? Could I remove the image with Staz-On cleaner or something like that without damaging the varnish? If so, what ink would you use and what cleaner? Or other ideas?
TIA
Re: AI/Stamping Question
Gee Beth... I wish I had a good "solve your problem" answer for you. I suggest looking at Tim's blog and his information about AI. Sorry I'm not more help! Maybe Neith is on and can give you a better answer... she's a Ranger DT member. (and don't I wish I had that job!)
Moncia
Moncia
No. 28 in the Order of PAO
Chief Bearer of the Torch and Admin
Chief Bearer of the Torch and Admin
Re: AI/Stamping Question
just a thought, after doing your background, you could stamp on tissue paper and tear the edges and decopage that on...but I'm not sure what kind of stamped image you are going for - if you're going for a real collagey type of background, this might work - especially if you wrinkle the tissue slightly.
whatever you do, post the pics! we'd love to see what you come up with
whatever you do, post the pics! we'd love to see what you come up with
Re: AI/Stamping Question
Beth
I am with Clare
the first thing that came to mind is decoupage
what ever you do, please post pictures of before and after
.
I am with Clare
the first thing that came to mind is decoupage
what ever you do, please post pictures of before and after
.
Re: AI/Stamping Question
The problem is that you need solvent ink in order to stamp on the case, but that will also interact with and remove the alcohol ink. What about stamping with waterproof indoor/outdoor acrylic paint? Or, instead of an initial coating of alcohol ink, use the Ranger Posh Metallic Inkabilities. That stuff really stays on great and requires lots of elbow grease and cleansers to remove
Re: AI/Stamping Question
What did I tell you? Neith knows!!
Monica
Monica
No. 28 in the Order of PAO
Chief Bearer of the Torch and Admin
Chief Bearer of the Torch and Admin
Re: AI/Stamping Question
Well all, I asked too late and missed the answer. Now I'm a week away from my next trip to Michaels.
I think I have a solution. Rub-ons. BUT ... will the varnish work over them to seal it all in? The ones I found are sort of glittery, not totally flat, so I'm thinking the varnish might be a problem. I'm experimenting on another item, so I'll try while I await Neith's wisdom.
BTW, these rub-ons were in the kids area where I went to find a spin art machine, thanks to you enablers!!
I think I have a solution. Rub-ons. BUT ... will the varnish work over them to seal it all in? The ones I found are sort of glittery, not totally flat, so I'm thinking the varnish might be a problem. I'm experimenting on another item, so I'll try while I await Neith's wisdom.
BTW, these rub-ons were in the kids area where I went to find a spin art machine, thanks to you enablers!!