Page 2 of 2
Re: Just wanted to share this!
Posted: Sun Jul 18, 2010 9:44 am
by capescrapper
Thanks Julie!
I can give you my dimensions if you need them!
Re: Just wanted to share this!
Posted: Sun Jul 18, 2010 1:45 pm
by jfugina
That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection!
Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!
Re: Just wanted to share this!
Posted: Mon Jul 19, 2010 11:52 am
by capescrapper
jfugina wrote:That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection!
Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!
No problem at all!
Back panel 10 x 7.5"
Middle divider 10 x 5"
Bottom front panel 10 x 3.75"
Bottom floor panel 10 x 2 5/8"
(2) Bottom side panels and (1) center divider 3 7/8 x 1 1/2"
(2) Middle side panels and (1) center divider 5 x 1"
I assembled the entire outer piece first and then added the divider pieces finding the midpoint and slid them down into place. After this was dry I added the bottom.
Re: Just wanted to share this!
Posted: Mon Jul 19, 2010 12:10 pm
by nancine
this is just super fantastic!
Re: Just wanted to share this!
Posted: Mon Jul 19, 2010 5:43 pm
by capescrapper
Thanks Nancy!
Re: Just wanted to share this!
Posted: Mon Jul 19, 2010 8:09 pm
by jfugina
capescrapper wrote:jfugina wrote:That would be great! I'm guessing I could probably work it out, but if you've done something that already works, then why mess with perfection!
Actually, I am interested in your dimensions because it's hard to gauge the depth of the pockets, and whether they're two across or one across. So some dimensions would be great. Thanks!
No problem at all!
Back panel 10 x 7.5"
Middle divider 10 x 5"
Bottom front panel 10 x 3.75"
Bottom floor panel 10 x 2 5/8"
(2) Bottom side panels and (1) center divider 3 7/8 x 1 1/2"
(2) Middle side panels and (1) center divider 5 x 1"
I assembled the entire outer piece first and then added the divider pieces finding the midpoint and slid them down into place. After this was dry I added the bottom.
Excellent. Thank you! Bookmarking for future reference.
