Page 1 of 2
Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 12:09 am
by paddlegal
I started yesterday afternoon pulling down 6 fridge bins packed with clear stamp sets, some with matching dies. Four that I purged now have room to breathe and the other two are empty! Two large paper grocery bags are stuffed with stamp sets.
Miles to go before I sleep. But so far this really feels good.
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 8:09 am
by pbp908
WTG Farley!
I love how we're egging each other on! Maybe I should say supporting???
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 10:01 am
by pamcook
Keep up the good work!
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 10:27 am
by Monica
pbp908 wrote:WTG Farley!
I love how we're egging each other on! Maybe I should say supporting???
Well, we do enable to buy, so perhaps this balances it out?
Way to go, Farley!
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 11:03 am
by nchoney
Maybe Farley needs to start the next RAK box.... then we can all swap things out so they get more use.
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 11:34 am
by paddlegal
nchoney wrote:Maybe Farley needs to start the next RAK box.... then we can all swap things out so they get more use.
RAK crate would be more accurate. After I do stamps, dies and odd items I will consider that. Or for your next ReCreate I’ll ship it to you. Hahaha. I actually thought of doing that this year but just wasn’t ready to do the job in time.
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 3:03 pm
by katymjo
I've got a load of wood-mounted stamps that are taking up a lot of space.
What's the best way to unmount them?
Will they then work in the TH Stamp Platform?
What can you do to repurpose the left-over wooden blocks?
Any ideas?
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 4:43 pm
by Monica
That's a lot of questions!
Yes, you can unmount them. Some unmount a lot easier than others, but I've had very few that were truly difficult. It simply takes patience and something good on TV to distract you from the tedium. I recommend removing the rubber from its cushion.
They will absolutely work in the TH stamp platform after being unmounted. Mine are coated with the Aleene's tack it over and over glue that's repositionable, but I know there are a few ways one can deal with unmounteds.
Honestly, I tossed all my wooden blocks because most still had the mounting foam on them. The ones that didn't we used for campfires.
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Wed Jul 03, 2019 7:11 pm
by mpizzazz
katymjo wrote:I've got a load of wood-mounted stamps that are taking up a lot of space.
What's the best way to unmount them?
Some will peel right off the wood and others need a bit of time in the microwave to soften the glue on the wood.
Will they then work in the TH Stamp Platform?
Absolutely! But get them down to the rubber only without the foam. You can put double sided tape on the back. Or I think a bit of a glue stick.
What can you do to repurpose the left-over wooden blocks?
I've found people on freecycle who wanted the blocks to attach UMs to or for some other unknown purpose/hobby.
Any ideas?
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Fri Jul 05, 2019 6:11 am
by troublesmom
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Fri Jul 05, 2019 10:25 am
by wannabescrappin
[quote="Monica"]That's a lot of questions!
They will absolutely work in the TH stamp platform after being unmounted. Mine are coated with the Aleene's tack it over and over glue that's repositionable, but I know there are a few ways one can deal with unmounteds.
Monica,
How do you use to store them after they have Aleene's on them? Heavy duty acetate? Does the Tack It get messy after a while?
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Fri Jul 05, 2019 10:30 am
by wannabescrappin
Great job, Farley!
I'm still organizing molds (does anyone want any molds?) paper and ribbon before I start on clear stamps. Of course What I pull out to purge gets quickly filled by Catherine Pooler stanps
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Fri Jul 05, 2019 12:09 pm
by nchoney
After Irene's flood, I wound up having to unmount all the wood-mounted stamps. The wood had gotten wet with the icky flood water. So.... I soaked them in some soapy water and that helped loosen the glue. Then I wound up just tossing all those wood blocks.
I then painted the backs with the Tack-it-over-and-over glue by Aileene's ... and it works great when using the stamps on an acrylic block or in my Misti or Tim Holtz platform.
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Fri Jul 05, 2019 12:20 pm
by Monica
wannabescrappin wrote:Monica wrote:That's a lot of questions!
They will absolutely work in the TH stamp platform after being unmounted. Mine are coated with the Aleene's tack it over and over glue that's repositionable, but I know there are a few ways one can deal with unmounteds.
Monica,
How do you use to store them after they have Aleene's on them? Heavy duty acetate? Does the Tack It get messy after a while?
I use the Crafter's Companion EZMount 8.5" X 11" stamp storage sheets that fit in 3 ring binders. My binders are 3" spines that I bought in a bundle from Costco.
Re: Farley’s Craft Room Purge - Week 1 Stamps
Posted: Sat Jul 06, 2019 3:35 am
by katymjo
Thank you for all your helpful ideas. I will try to unmount a few and see how they go.